 | Resume: EIT --Electrical Engineering
Placentia, CA US
Multifaceted Engineering Projects Search Data LabResearching, developing, testing, modeling, designing, coordinating novel software prototype for serious nonlinear feedback control systems where linearity fails. Utilize labview to develop user friedly interface through support from National Instruments in Irvine CA. Litigated advanced feature extraction software patent application , (inventor : Amar Vakil), on claims with United States Patent and Trademark Office examiner. Utilized California | | | | |
| Resume: Director of Quality and Reliability
San Jose, CA US
Over years of experience in Product Q&R at Intel and Altera Corporations Q&R Management with experience in all aspects of quality systems and management, reliability failure mechanisms and reporting, test processes, and customer collaboration Strong Leadership and Organizational Development. Large industry network Strong communication skills Knowledgeable in breadth of current reliability / technology issues – Environmental compliance, nd-level reliability, Soft-error (SEU) & Mitigation | | | | |
| Resume: Mech engr
Houston, TX US
EDUCATION • Master of Science in Mechanical Engineering California State University, Long Beach, California • Bachelor of Science in Mechanical Engineering California State University, San Louis Obispo, California • Professional Engineer (PE), State of Texas (License No. ) • Member ASME • Multinational Experience SUMMARY OF EXPERIENCE Over Plus years experience as a Sr. Mechanical Piping Specialist / Equipment Engineer responsible for generating Specifications, Material selection, | | | | |
| Resume: Engineering Technician
Austin, TX US
CISCO SYSTEMS CORPORATION, Austin, Tx. - Electronics Test Engineer/technician. My experience includes designing and building custom test equipment used to validate the electronic design of the Catalyst k & k switching product lines. I was responsible for establishing an automated testing standard within my group (both H/W & S/W) this included but is not limited to: specifying the equipment required, building & deploying the Linux servers & equipment test racks, Adding the test setups into the | | | | |
| Resume: Mechanical Engineer
BEEVILLE, TX US
Eric M. Walker Objective: To obtain a career in the field of Mechanical Engineering Education: Texas A&M Kingsville - B.S. Mechanical Engineering Projects: • Texas Space Grant Consortium - Lunar Rover Design Project (August – May, ) • Used the skills acquired in Mechanical Engineering to redesign the Lunar Rover to better optimize the components for the uses required today. These optimizations include: material selection of the chassis, designing a folding mechanism for the chassis, | | | | |
| Resume: Faculty or Engineer
Beaver Falls, PA US
Email: OBJECTIVE: I desire to * bring my passion for teaching, broad and cross-cultural life`s experience and understanding, and a well-rounded education to the classroom in order to excite and enrich my students` education at my next employer who will provide me an opportunity to serve, or in any workplace where I am hired; * instill my passion for learning and love of knowledge in my students in order to motivate them to aspire beyond themselves and to see possibilities | | | | |
| Resume: engineer
Paragould, AR US
Summary I am a hard-working, entry-level mechanical engineer, looking to apply my education and experience to a job in an industrial work environment. My areas of proficiency include, but are not limited to, fluid thermal energy systems, mechanics, engineering economics, and data acquisition. Highlights •Knowledge of SolidWorks and SolidWorks Simulation software. •Knowledge of LabVIEW software •PC and software competency, including MS Office Suite. •Quick learner •Complex problem solving skills | | | | |
| Resume: Cad Drafter
Garland, TX US
EDUCATION: ITT Technical Institute- Richardson, TX Associate of Applied Science in Computer Drafting & Design Graduation: September GPA: . SKILLS: • Bilingual English/ Spanish • Excellent CAD drafting skills. • Familiar with Revit, and architectural design • Creating parametric solids from profiles using Inventor. • Create different views in Autodesk Inventor. • Able to create floor plans, and elevations. • Apply proper dimensioning. • Able to handle multiple projects at a time. • | | | | |
| Resume: Civil Engineer
Mount Prospect, IL US
EDUCATION Northern Illinois University December (Expected) MBA - Project Management GPA: ./. University of Illinois - Chicago May - B.S. Civil Engineering GPA: ./. COURSEWORK Steel Structures I, II Foundation Analysis and Design Reinforced Concrete I, II Highway and Traffic Design Structural Analysis Water Resources and Hydraulics Structural Mechanics Finite Element Methods SKILLS LANGUAGES Matlab AutoCAD Civil D Hindi/Urdu MUTCD STAAD Marathi SAP MicroStation V | | | | |
| Resume: Electrical Engineer
Fountain Valley, CA US
ELECTRICAL ENGINEER/ELECTRICAL DESIGN ENGINEER Leading through integrity and experience PROFILE Highly accomplished and experienced Electrical Engineer/Electrical Design Engineer with an outstanding record of success guiding all aspects of optimizing Electrical Design and Construction operations for world-class construction projects. Extensive and diverse experience in a variety of projects, a recognized expert in Electrical Engineering as it applies to electrical design, procurement and | | | | |
| Resume: Construction Project Manager
Broomfield, CO US
; Denver International Airport Projects located on all Concourses and the Terminal. Denver, CO. Responsible for the design and construction of individual concession projects. Required day-to-day interaction with concession clients, DIA, and the Real Estate Development firm, Skyport International. Denver International Airport - Concourse B, Regional Jet Facility?. Denver, CO Contract Administrator and Director for the design and construction of aviation projects at DIA. Project Manager / | | | | |
| Resume: Assemble Or/and Technician
San Jose, CA US
OBJECTIVEInterest in assembly or/and technician position which will be able to utilize my working experiences in electrical, optical and mechanical packaging.QUALIFICATION• Experience with electrical, optical and mechanical packaging. Familiar with Lab tools & instruments.• Experience with electronic components surface mounting, soldering, repairing, troubleshooting and functional testing electronics devices base on engineering spec. • Extensive experiences with built optical, electrical and | | | | |
| Resume: Assembly/test Technician
Lockport, NY US
SUMMARY Assembly Test Technician with over seven years OEM and aftermarket production experience. Sound track record of contributing to a decrease in lag time and past due production. Solid working knowledge and understanding of continuous improvement planning. Strong work ethic with proven ability to work well in a team environment and individually with minimum supervision. Skills, abilities and knowledge are transferable to a wide range of industries. EXPERIENCE Woodward HSC, Buffalo, NY | | | | |
| Resume: Electro/mechanical assembler technician
Glendora, CA US
The nature of work and business that I am involved with is in the electronics/electrical lighting industry. Our line of work consists of production, assembly, and manufacturing of electronic components and key unit devices for architectural, theatrical, and agricultural companies. I have been in this field for years. I am well experienced in building and customizing major electronic and electrical components through schematic design. Because of my familiarity and well-maintained position in | | | | |
| Resume: ELECTR-MECHANICAL TECHNICIAN
Philadephia, PA US
OBJECTIVE: To obtain a position that will allow me to contribute to the overall success of the company. SUMMARY: Electronics Technician with expertise in troubleshooting down to the component level,offer a strong array of basic technical and mechanical knowledge ,can identify most electronic circuits.Ability to interface effectively with other departments. Familiar with various testing machinery: such as vibration, shock, centrifuge and wind tunnel machines. Experienced with calibration and | | | | |
| Resume: Technician
Chicago, IL US
OBJECTIVE To work alone or as a team player with a service-oriented organization where my technical and customer service skills can be fully utilized. BACKGROUND SUMMARY More than ten years in business performing extensive mechanical, electrical, electronic, hydraulic and custom fabrication to increase the performance of automobiles in the areas of safety, control, and power. Also performed administrative functions relating to acquiring work, bookkeeping, sales, tech support and management. | | | | |
| Resume: Test Technician
Raymond, NH US
SUMMARYAn energetic professional with ATE experience in computer manufacturing. Motivated to deliver dynamic changes to meet manufacturings needs. Major strengths in developing test programs utilizing GenRad and Teradyne series automatic test equipment. Additional skills in developing module specific test and communicating with design engineering concerning testability issues.EXPERIENCEHP/COMPAQ., Salem,NH / Marlborough, MA -Supported high volume PCB line. Duties included networking | | | | |
| Resume: Technician
North Oxford, MA US
SUMMARY: Hands-on, resourceful Mechanical Test Technician with advanced technical proficiency and a strong background in tuning, metrology, troubleshooting, assembly, machining, telecommunications and electrical. Proven success in cutting-edge, fast paced, high growth technology environments. Able to manage complex disciplines and circumstances, providing professional competence while maintaining logic, clarity and composure in pressure intense situations. Sound judgment, problem solving and | | | | |
| Resume: Mechanical Technician
Denver, CO US
Exponent Inc. Phoenix AZ Mechanical Technician / –/ Assigned to Southwest Asia Theatre (Afghanistan, Iraq) to perform Technical Engineering support for the US Army. Assigned to REF (rapid equipping force) under the direction of the armies Chief of Staff. Our groups mission is to provide field support for the US Army in Iraq, responsible for developing and providing quick prototypes to enable the soldiers to have a clear and decisive advantage on the battlefield. Once materials are | | | | |
| Resume: Assembler
Chino Hills, CA US
OBJECTIVE: To contribute strong airframe and power plant mechanical and technical skills and training to your organization. Practical experience working on Cessna Cessna Jet Stream HP-MKI Piper Aztec, DC, a PT-D, Lycoming O- and a J- power plants as well as a Magneto. QUALITIES AND STRENGTHS: A well qualified mechanic ,worked in fast paced, high volume companies. A team player, motivated, hardworking, reliable and productive Ability to deliver high quality work and excellent | | | | |
| Resume: Electro-Mechanical Assembler
Worcester, MA US
QUALIFICATIONS Over ten years experience in manufacturing environment including following: Knowledge and application in Electrical Mechanical assembly of small and large mechanical assemblies Familiar with Safety and ESD practices Experience with hand, power tools and air tools Ability to use oscilloscope, multimeter and caliper Ability to read blueprints and schematics Performing inspection of parts and assembly to insure quality, attention to detail Skills in Windows ,Word and Excel WORK | | | | |
| Resume: Electro-Mechanical Assembly
Rochester, NY US
SUMMARY OF QUALIFICATIONS Over years experience Electronic Technician or related position (IPC-)(ISO-,)(NASA Std...)(NASA.)(ESD Protocol Certified) (J-STD-c) J STANDARD Certfiication Detail oriented, High standards, Safety-conscious Wide range of Industrial Electronic Applications i.e. set-up, repair, building and testing. EDUCATION: MONROE COMMUNITY COLLEGE, Rochester NY Computer Science/Applied Liberal Arts Associates EMPLOYMENT HISTORY | | | | |
| Resume: Electro-Mechanical Assembly
San Diego, CA US
Guillermo Mason Hamilton St. # San Diego, CA Phone: -- Fax: -- E-mail: Objective To obtain a responsible and challenging position in this company, where my dedication to detail will create opportunities for growth. Education March , Electro-Mechanical Assembly, Certificate Center for Employment Training Awards Curtiss Wright, the Wright Idea Awards Invention a Mobile Calibration Test, Results: Whit a mobile unit, a chassis | | | | |
| Resume: Engineering Technician
Webster Groves, MO US
George C. PiresObjective To obtain a challenging position in engineering or manufacturing.Professional Experience – Present AP Materials St. Louis, MOSr. Technician/Group Leader• Worked with a small team to restore a Sodium Flame Encapsulation (SFE) process and to resolve challenging powder collection issues.• Operate, maintain and modify the SFE reactor and system in support of nano-powder development.• Design & fabricate various systems and apparatus.• Operated heat treatment system. | | | | |
| Resume: engineering technician
To be employed in a position where I can bring out my abilities and enhance my professional skills and to be a part of a dynamic organization wherein my education, strengths and capabilities would be able to contribute in attaining an organization’s visions and objectives. WORK EXPERIENCE: AMKOR TECHNOLOGY PHILIPPINES INCORPORATED North Science Avenue Technopark Bi an Laguna PREVENTIVE MAINTENANCE EQUIPMENT ENGINEER Sept.-Feb. Major Duties and Responsibilities: • Performs various | | | | |
| |
